No products
Prices are tax included
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
View larger 
DJI Agras T55 Agriculture Drone with 3 Batteries and Charger C12000
Out of Stock
Features:
- 50 L Spraying Tank, 50 L/min Flow Rate (Mist Sprinklers)
- 55 kg Spreading Payload, 400 kg/min Flow Rate
- Smoother Obstacle Bypassing, Worry-Free Flight
- Lightweight Construction, Easy to Transport
- Fully Automatic Operation
- Innovative Onboard Battery Heat Sink, Built for the Heat
More info
DJI Agras T55
Farming, Simplified.
The Agras T55 is light, intuitive, and easy to get started with. It supports high-application-rate spraying, efficient and precise spreading, and lifting operations. Featuring an upgraded safety system, it is safer with every flight[1]. An innovative Onboard Battery Heat Sink keeps performance steady even in high temperatures. With a cost-effective configuration, it offers excellent value.
Beginner-Friendly,
Easy to Start
Ensures convenient transport
The lightweight construction features a new carrying handle, making solo transport easier and improving convenience for vehicle loading and field operations.
Automatic Operation
Fly once around the field boundary and obstacles to generate the operation area in real time. Then, with one click, the drone takes off for automatic operation. It returns home automatically when out of liquid or low on battery.
Terrain Following Without Aerial Mapping
More accurate altitude stabilization and more stable Terrain Following. The Agras T55 can precisely detect terrain relief, allowing standard orchards to carry out Terrain Following operations without aerial mapping, making operation simpler and more efficient.
High Flow Rate,
Strong Penetration
Field Spraying
40L/min Flow Rate
Multi-Atomization Centrifugal Sprinklers ×2
(Standard)
50 - 500μm
Adjustable Droplet Size
4 - 11m
Effective Spray Width[2]
50L
Spraying Tank
Orchard Spraying
50L/min Flow Rate
Rear-Quad Mist Sprinklers ×4 (Optional)
50 - 500μm
Adjustable Droplet Size
50L
Spraying Tank
Precise Spraying, Outstanding Durability
Multi-Atomization Centrifugal Sprinklers
A new centrifugal spraying disc design enables the dual sprinklers to support a maximum flow rate of 40 L/min and a droplet size range of 50 - 500 μm, making them suitable for most operational scenarios.
Mist Sprinklers (Optional)
Fine droplets as small as 50 μm penetrate the undersides of leaves more effectively, delivering more uniform crop coverage.
Rear-Quad Mist Sprinkler Layout
The rear-quad mist sprinkler layout ensures uniform coverage during low-speed orchard operations while reducing mist interference with the vision system.
Payload Indicator Light
The new indicator light uses different light signals to quickly show the current tank level.
Magnetic Drive Impeller Pumps
An optimized impeller structure and increased chamber volume meet the high flow demands of orchard scenarios. With a corrosion-isolated design, it remains stable and reliable.
Dual-Channel Electromagnetic Flow Meter
Real-time precise flow detection and dynamic control ensure high-precision operations. The design eliminates direct contact with liquid, preventing corrosion and enhancing durability.
Efficient and Precise
Large Capacity
The 80 L high-capacity spreading tank meets the needs of operations on small and medium-sized plots.
80 L
High Capacity Spreading Tank
55 kg
Max Payload
High Flow Rate
With a maximum flow rate of 400 kg/min, it delivers highly efficient fertilizer spreading.
400 kg/min
High Flow Rate[3]
10 m
Effective Spreading Width[4]
Precise Dosing, Efficient Spreading
Calibration-Free Flow Control
One click loads material templates to reduce preparation time. During operation, the system automatically adjusts the spreading flow rate to precisely control application across the entire field.
High-Precision Weighing Sensor
Provides a real-time, accurate display of remaining material, allowing precise refilling and helping reduce waste.
Centrifugal Spreader Disc
Ensures uniform spreading across the entire flow range with excellent results. Features a stainless steel construction for durability and strength.
Large Loading Gate
Makes bulk loading easy and convenient.
Screw Feeder
An optimized chamber design, paired with a high-torque motor, helps prevent clogging and leakage.
Five Feeder Types
Supports five interchangeable feeder sizes for more precise flow and greater adaptability across seeding, fertilizing, and feeding.
Extra-Large Feeder
Suitable for granulars such as fertilizers, wheat seeds, and feed, etc.
Recommended application rate: 75-750 kg per hectare.
Recommended particle size: 0.5-10 mm
Medium Feeder
Suitable for granulars such as rice seeds, etc.
Recommended application rate: 22.5-120 kg per hectare.
Recommended particle size: 4-6 mm
Large Feeder (Optional)
Suitable for granulars such as rice seeds, fertilizers, etc.
Recommended application rate: 75-270 kg per hectare.
Recommended particle size: 4-10 mm
Medium-Small Feeder (Optional)
Suitable for granulars such as pelleted aquatic feed, etc.
Recommended application rate: 22.5-120 kg per hectare.
Recommended particle size: 0.5-2 mm
Small Feeder (Optional)
Suitable for granulars such as rapeseed, granular herbicides, and granular insecticide, etc.
Recommended application rate: 3-22.5 kg per hectare.
Recommended particle size: 0.5-4 mm
Comprehensive Protection,
Worry-Free Operations
More Precise Obstacle Detection
The all-new millimeter-wave radar delivers a point cloud density of up to 250,000 points per second for more precise obstacle detection. With upgraded hardware and algorithms, it also ensures reliable operation in rain and fog.
A Broader View
The all-new quad-vision system combines three top-mounted cameras with a low-light full-color FPV camera, helping pilots view scenes in front, behind, to the left, to the right, and below the drone.
Smoother Obstacle Bypassing
It accurately detects and bypasses obstacles such as power lines. In complex scenarios, it can also proactively find a new path around obstacles [1].
Safer With Every Flight
During flight, the system can automatically detect obstacles such as power lines and utility poles, and save them to field information for safer, smoother flights later on [1].
AR Enhanced Display
Multi-directional auxiliary views and the main FPV view provide pilots with a more comprehensive view, all with AR-enhanced display features that clearly display field boundaries, obstacles, breakpoints, and more [5].
Steady Lifting, Safer Handling
The Agras T55 Lift System supports a lifting payload of 40 kg and features Cargo Obstacle Avoidance [5] and Emergency Cable Release. Equipped with a Triaxial Force Sensor as standard, it enables and Automatic Weighing for stable and safe lifting.
Cargo Obstacle Avoidance
The all-new Cargo Obstacle Avoidance algorithm slows the drone in advance based on obstacle positions during flight, reducing the risk of entanglement and improving safety [1].
Emergency Cable Release
The all-new Lever-action Emergency Cable Release can complete release in just 3 seconds, helping resolve risky situations quickly. The cable can also be conveniently reinstalled for repeated use.
Auto Balance Control
Using a triaxial force sensor to detect the cargo's swing direction and angle, the drone automatically adjusts its posture to reduce swinging. This makes lifting easier to handle, speeds up unloading, and reduces the risk of cargo striking the drone body.
Automatic Weighing
The cargo weight will be displayed and easy to find, and can cumulate lifting weight for easier settlement.
Seamless Signal Stability
O4 video transmission helps keep the signal stable for smooth operations in challenging signal conditions.
Large Screen Remote Controller | Professional & Versatile
Featuring a 7-inch, 1400-nit high-brightness screen, dual joysticks, and a full set of physical buttons, it supports O4 video transmission at distances of up to 2 km [6] to meet the needs of long-range and multi-scenario operations.
D-RTK 3 AG (Optional)
It maintains centimeter-level positioning accuracy even without a network connection or under ionospheric interference. With PPP technology, no fixed base station is required, offering greater convenience and flexibility.
O4 Relay (Optional)
If the O4 video transmission signal is interfered with and no mobile network is available, an O4 relay can be deployed to ensure smooth operations.
Cooling During Flight,
Built for the Heat
Onboard Battery Heat Sink
The innovative Onboard Battery Heat Sink features a built-in air-cooled system and a new battery cooling air duct to enable cooling during flight. Combined with a ground-based air-cooled heat sink, it ensures continuous operation without overheating.
Multiple Charging Options
DB1050 Intelligent Flight Battery
20 Ah Ultra-Fast Charging
Weight: 8.3 kg
Ergonomic handle
DB1580 Intelligent Flight Battery
30 Ah Ultra-Fast Charging
Weight: 11.7 kg
Ergonomic handle
Compatible with the D14000iE Multifunctional Inverter Generator and C12000 Intelligent Power Supply
D8000iE Multifunctional Inverter Generator
15% more fuel-efficient power generation [7]
6500 W fast charging [8]
48 V / 500 W DC output 1.8 m charging cable
C7000 Intelligent Power Supply
Three-phase power input 7000 W fast charging [8]
Adaptive power protection 1.8 m charging cable
C10000 Intelligent Power Supply
Single-phase power input 9000 W fast charging [8]
Adaptive power protection 1.5 m charging cable
*The appearance of the product is subject to the actual delivered product.
- The effective spray width of the spraying system depends on the actual operation scenario.
- Compared with the T70/T70P agricultural drones and their supporting equipment. Test results may vary under different testing conditions.
- Measured with compound fertilizer. The maximum flow rate may vary depending on the particle size, density, and surface smoothness of different fertilizers.
- Measured at an operating height of 3 m, with a spinning disc speed of 1,100 rpm and a uniformity requirement of CV < 30%. Higher disc speeds and flight altitudes increase the spreading width.
- The effective sensing range, obstacle avoidance, and obstacle bypassing capabilities may vary depending on ambient light, rain, fog, and the material, position, shape, and other properties of the target object. Downward sensing is used to assist with Terrain Following and altitude stabilization, while sensing in other directions is used for obstacle avoidance. Except in scenarios involving linear obstacles, if an obstacle avoidance failure at speeds up to 13.8 m/s results in aircraft damage, log analysis can be used to determine responsibility, and damage caused by non-human factors may be covered by the free warranty. For scenarios involving linear obstacles, if an obstacle avoidance failure at speeds up to 7 m/s results in aircraft damage, log analysis can be used to determine responsibility, and damage caused by non-human factors may be covered by the free warranty. To ensure operational safety, it is recommended to mark power lines, guy wires, and similar objects as obstacles.
- Downward sensing is used to assist with Terrain Following and altitude stabilization. Users should pay attention to the flight environment. Damage caused by the bottom of the aircraft colliding with obstacles is not covered by the free warranty.
- The aircraft cannot proactively avoid moving objects. Users should pay attention to the flight environment. Damage caused in such scenarios is not covered by the free warranty.
- Cargo obstacle avoidance is for flight assistance only. Users should pay attention to the flight environment. Damage caused by cargo or lifting cables colliding with obstacles is not covered by the free warranty.
- AR safety assistance features are for supplementary guidance only. Operators must confirm that the surrounding environment is safe during operation. The detection performance of sensors such as the quad-vision system and FPV camera may vary depending on ambient light, rain, fog, and the material, position, shape, and other properties of the target object.
- When using this feature, make sure the positioning mode is set to RTK.
- Measured at a flight altitude of 2.5 m, with no obstructions and no electromagnetic interference.
- When using 4G enhanced video transmission, the drone must be equipped with a DJI Enhanced Video Transmission Module, available only in Chinese mainland, and connected to the network properly. The remote controller must also be connected to the internet via 4G or Wi-Fi. In accordance with the requirements of the Ministry of Industry and Information Technology, this feature may be restricted in some regions, such as Xinjiang and Tibet.
| Aircraft | |
|---|---|
| Weight (with battery) |
|
| Max Takeoff Weight |
|
| Maximum Wheelbase (Diagonals Wheelbase) | 2415 mm (Diagonals Wheelbase) |
| Dimensions |
|
| Hovering Accuracy Range (with strong GNSS signal) |
|
| Max Configurable Flight Radius | 2 km |
| Operating Temperature | 0° to 40°C |
| Max Wind Speed Resistance | 6 m/s |
| Propulsion system - Motors | |
| Stator dimensions | 155 × 16 mm |
| KV | 55 rpm/V |
| Propulsion system - Propeller | |
| Material | Carbon Fiber Composite |
| Dimensions | 62 inches |
| Quantity | 4 pairs |
| Spraying system - Spray tank | |
| Material | HDPE |
| Volume | 50 L |
| Operating Payload | 50 kg |
| Spraying system - Sprinklers | |
| Model | LX09050DX (standard centrifugal nozzle) / LX09510DX (optional mist nozzle) |
| Quantity | 2 (standard) / 4 (optional) |
| Nozzle Distance | 1800 mm (Standard Two Nozzles) |
| Droplet size | 50 - 500 μm |
| Effective spray width | 4 - 11 m |
| Spraying system - Delivery Pumps | |
| Type | Impeller pump (Magnetic Drive) |
| Quantity | 2 |
| Maximum flow rate | 40 L/min (standard 2 nozzles), 50 L/min (optional 4 nozzles) |
| DS80L Spreading System | |
| Volume | 80 L |
| Operating Payload | 55 kg |
| Compatible Material Diameter |
|
| Spreader structure type | Centrifugal Disc |
| Discharge structure type | Screw Feeder Feeding |
| Maximum discharge rate | 400 kg/min (compound fertilizer) |
| Effective spreading width | 3 - 10 m |
| DL100 lifting system | |
| Operating Payload | 40 kg |
| Lifting Cable Length | 10 m |
| Recommended cable length | 10–15 m |
| Operating Temperature | 0° to 40°C |
| Safety System | |
| Radar EIRP |
|
| Operating Temperature | 0° to 40°C |
| Operating Environment Requirements | Normal light intensity, rich Scene texture features, and no dirt. |
| Operating Power Consumption |
|
| Field of View (FOV) |
|
| Measurement Range | 60 m |
| Effective safe obstacle Bypass speed | ≤ 13.8 m/s |
| Effective obstacle avoidance Height | ≥ 1.5 m |
| Safety distance | 2.5 m (distance from the obstacle after the aircraft brakes and stabilizes in Hover) |
| DJI RC Plus 2 AG | |
| Model | TKPL 2 |
| Screen | 7-inch LCD touchscreen; Resolution: 1920 × 1200; LIGHTEN: 1,400 cd/m² |
| Storage Temperature |
|
| Recharging Temperature | 5° to 40°C |
| Internal Battery Runtime | 3.8 hours |
| External Battery Runtime | 3.2 hours |
| Charging Type | Use a USB-C Fast recharge charger with a Max Power output of 65 W (maximum voltage 20 V); the DJI Portable Charger is recommended. |
| Charging Time | 2 hours for internal battery or internal and external battery (when remote controller is powered off and using a standard DJI charger) |
| DB1050 Intelligent Flight Battery | |
| Weight | 8.3 ± 0.3 kg |
| Capacity | 20000 mAh |
| Voltage | 52.5 V |
| DB1580 Intelligent Flight Battery | |
| Weight | 11.7 ± 0.3 kg |
| Capacity | 30000 mAh |
| Voltage | 52 V |
| D8000iE Multifunctional Inverter Generator | |
| Output Channels |
|
| Charging Time | 8–9 minutes (DB1050 Intelligent Flight Battery, 30%–95% level) |
| Fuel tank capacity | 20 L |
| Starting method | One-button start |
| Operating Temperature | -20° to 40°C |
| Compatible Battery | DB1050 / DB1580 / DB2160 Intelligent Flight Battery |
| Dimensions | 452 mm × 566 mm × 600 mm |
| Weight | 46 ± 0.5 kg |
| Fuel type | Unleaded gasoline with RON ≥91 (AKI ≥87) and alcohol content less than 10% (*Brazil: unleaded gasoline with RON ≥ 91 and alcohol content of 27%) |
| Reference fuel consumption | 500 mL/kWh |
| Engine Oil Capacity | 0.8 L |
| Engine Oil Type | SN 15W-50 |
| C7000 Smart Charger | |
| Charger Model | CSX711-7000 |
| Dimensions | 460 mm × 160 mm × 80 mm |
| Weight | 8.5 kg |
| Input Voltage |
|
| Output Voltage | 50 - 62 V |
| Rated Output Current |
|
| Rated Power |
|
| Charging Time | 8–9 minutes (DB1050 Intelligent Flight Battery, 30%–95% charge) |
| Protection Functions | Over-temperature, over-voltage, under-voltage, short-circuit, fan stall, and other protection functions |
| Operating Temperature | -20° to 40°C |
| Output Channels | 1 |
| Compatible Battery | DB1050 / DB1580 / DB2160 Intelligent Flight Battery |
| Relay | |
| Model | RL0265 |
| Dimensions |
|
| Weight | 630 g |
| Input Voltage | 2.7 V to 24 V |
| Power consumption | 10.48 W (FCC) |
| Total Capacity | 6500 mAh |
| Operating Time | 5 hours |
| Operating Frequency | 2.4000-2.4835 GHz, 5.170-5.250 GHz, 5.725-5.850 GHz |
| Signal range | 4 km (MIC/KCC/CE), 8 km (FCC) (in a None-interference, unobstructed environment, at a flight altitude of 2.5 m) |
| Charging Time | 2.5 hours (30 W recharge) |
| Ingress Protection Rating | IP55 |
| D-RTK 3 AG | |
| Supports satellite systems |
|
| Dimensions | 345 mm × 244 mm × 300 mm |
| Weight | 3.77 kg (including packaging) |
| Power consumption | 7 W |
| Total Capacity | 6500 mAh |
| Operating Time | 7 hours |
| Operating Frequency | Broadcast mode: O4: 2.4 GHz/5.8 GHz |
| Signal range |
|
| Charging Time | 2.5 hours (30W recharge) |
| Ingress Protection Rating | IP67 |
| Positioning Accuracy |
|