The DJI Mic Mini Transmitter Charging Dock is a compact station designed...
The DJI Mic Mini Transmitter Charging Dock is a compact station designed...
DJI Mic Mini Clip Magnet makes it easy to attach DJI Mic Mini...
DJI Mic Mini Clip Magnet makes it easy to attach DJI Mic Mini...
Specifications:Integrates a Lidar module, an RGB camera, and a...
Each propeller blade has been put under precise dynamic balancing tests...
Features:Autonomy: an ideal option for use in locations without...
Features:Car charger with two USB-C and one USB-A outputs, equipped...
Special designed lightweight professional high-resolution cinema cameras for drones and professional flying platforms, gyroscopic stabilized mounts and gimbals for drones and other type of copters. Professional camera handheld gyro-stabilized gimbals like DJI Ronin for cinema and movie use. Extremely precise gimbals for installation on flying platforms or studio shooting cranes with professional digital camera with 4K resolution. In addition to the gimbal, the mounted camera on them, can be controlled with wireless controller that allows you to capture exactly what you want, exactly as you want it. DJI gimbals are compatible with cameras from Canon, Panasonic, BlackMagic and Sony.
Specifications:Integrates a Lidar module, an RGB camera, and a high-accuracy IMU High Efficiency 2 km2 covered in a single flight[1] High AccuracyVertical Accuracy: 5 cm Horizontal Accuracy: 10 cm[2]Point Rate: 240,000 pts/s Supports 3 Returns[3] Detection Range: 450 m (80% reflectivity, 0 klx) IP44 Ingress Protection Level Point...
Professional 4K MFT camera and gimbal DJI Inspire 1 Video recording at 4096×2160 (24fps) or 3840×2160 (30/25fps) 16MPix stills with crystal quality 12.8 f-stops dynamic range Micro 4/3 MFT sensor and interchangable lenses Precision 3-axis stabilisation Compatible with Olympus, Panasonic, DJI and other lenses for MFT mount
Professional 4K camera and X5 gimbal for DJI Inspire 1 Video recording at 4096×2160 (24fps) or 3840×2160 (30/25fps) 16 stills with detail and clear quality 12.8 f-stops dynamic range Micro 4/3 MFT sensor and interchangable lenses Precision 3-axis stabilisation Compatible with MFT mount: Olympus, Panasonic, DJI and etc
Original Carry Case for DJI OSMO with Oxford fabric exterior
Original SSD drive for DJI Zenmuse X5R camera
With the grip, you can conveniently hold your DJI Ronin-M / DJI Ronin-MX or simply lean it against vertical surface when you are not using it. Expansion screws are also available for personal optimization.
The Ronin-S DC Power Cable connects a camera to the 12V accessory power port on the Ronin-S. The other end of the cable steps down the power to 7.4 V/1 A and must be connected to a compatible aftermarket dummy battery based on your camera model (not provided by DJI and must be purchased separately). Compatibility:Ronin-S.
The Multi-Camera Control USB Female Adapter is used with your camera's USB cable to connect your camera and the Ronin-S Camera Control Port, allowing you to control your camera via the Ronin-S Camera Control Button. Please refer to the Ronin-S Camera Compatibility List for more information on the supported camera models, control features, and camera...
Ronin-S/SC Camera Riser is attached under the camera to mount and balance onto the Ronin-S/SC. Specifications:Dimensions: 48×40×11 mm.Compatibility:Ronin-S Ronin-SC
Ronin-S Top Hotshoe Bracket is used to more securely mount a DLSR camera to the Ronin-S. It is recommended to mount the camera using a Top Hotshoe Bracket when mounting the gimbal on a car. Compatibility:Ronin-S.
The BG18 Grip makes Ronin-SC compatible for handheld use. A 2450 mAh built-in battery powers the gimbal for up to 11 hours. Specifications:Model: RB2-2450mAh-7.2V; Battery Type: 18650 LiPo Battery Rated Capacity: 2450 mAh; Energy: 17.64 Wh.Compatibility:Ronin-SC.
Specifications:Accuracy without GCPs 3 cm horizontally / 5 cm vertically[1] High Efficiency 3 km2< covered in a single flight[2] 45 MP Full-frame Sensor 45 MP Full-frame Sensor 3-axis Stabilized Gimbal Smart Oblique Capture Global Mechanical Shutter [3], Shutter Speed 1/2000 Seconds TimeSync 2.0 - synchronization at the microsecond level...
DJI Focus - RSS cable for Thumbwheel Connect the communication port on the Thumbwheel and the power port on the Remote Start/Stop using the DJI Focus - Thumbwheel-Remote Start/Stop Cable, then connect the P-TAP port to a DC power supply (6V-12V) to power the Remote Start/Stop. Compatibility DJI Focus Thumbwheel Ronin-MX Remote Start Stop In the box:...
The DJI Zenmuse XT Thermal Imaging Camera is developed by DJI and FLIR; Professional flexibility and parameters; Thermal image in real time on your tablet or smartphone; Compatible with DJI Inspire 1 and DJI Matrice 100; The most modern technology for clear picture: DDE, SSO, ACE и IBHEQ; Fully controllable via DJI GO App;
Features:High Precision Exceptional Efficiency Superior Penetration 250m/450m Detection Range 5 Returns Turnkey Solution Point Cloud LiveView One-Click Processing on DJI TerraCompatibility:DJI Matrice 300 RTK DJI Matrice 350 RTKIn the box:Zenmuse L2 ×1 microSD Card (128GB) ×1 Lens Cap ×1 Storage Case ×1 Lens Cleaning Cloth ×1
Specifications:Accuracy without GCPs 3 cm horizontally / 5 cm vertically[1] High Efficiency 3 km2< covered in a single flight[2] 45 MP Full-frame Sensor 45 MP Full-frame Sensor 3-axis Stabilized Gimbal Smart Oblique Capture Global Mechanical Shutter [3], Shutter Speed 1/2000 Seconds TimeSync 2.0 - synchronization at the microsecond level...
Specifications:Integrates a Lidar module, an RGB camera, and a high-accuracy IMU High Efficiency 2 km2 covered in a single flight[1] High AccuracyVertical Accuracy: 5 cm Horizontal Accuracy: 10 cm[2]Point Rate: 240,000 pts/s Supports 3 Returns[3] Detection Range: 450 m (80% reflectivity, 0 klx) IP44 Ingress Protection Level Point...