No products
Prices are tax included
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
DJI Power Portable Power Station 3072Wh Combo
In Stock
Features:
- Genuine Ultra-High-Capacity Power Output
- Dual 140W USB-C Ports, Super Fast Charging
- 23dB—Sleep Undisturbed Indoors or Camping
- Fast Charges DJI Drones
- Fully Charged in 70 Mins
- Comprehensive Safety
- Supports Solar Charging
- Extensive Accessories
In the box:
- DJI Power 1000 ×1
- DJI Power AC Power Cable ×1
- DJI Power Expansion Battery 2000 ×1
- DJI Power Dongle ×1
More info
DJI Power 1000
Power Your World
DJI 1024Wh Portable Power Station
Stable High-Power AC Output
DJI Power 1000 has a battery capacity of 1024 Wh, providing a max AC output power of 2400 W. [1] It can also fast charge DJI drone batteries to unleash your aerial content creation.
1024Wh Capacity Charging Ability
Camping and Road Trips
Mobile Phone Approx.
57 times
Car Refrigerator Approx.
19 hours
Camping Light Approx.
32 times
Projector Approx.
9.2 hours
Coffee Machine Approx.
55 mins
Electric Fan Approx.
9 hours
Content Creation
Digital Camera Approx.
59 times
Speaker Approx.
64 times
Drone Approx.
12 times
Laptop Approx.
9 times
Photography Lighting Equipment Approx.
1.2 hours
Home Backup Battery
Lamp Approx.
92 hours
Juicer Approx.
3.6 hours
Refrigerator Approx.
45 hours
Rice Cooker Approx.
1.2 hours
Wi-Fi Router Approx.
76.8 hours
Microwave Oven Approx.
1.3 hours
DIY
Power Saw Approx.
40 mins
Electric Chainsaw Approx.
29 mins
Electric Jack Hammer Approx.
1.2 hours
* Measured under 25° C laboratory conditions, using DJI Power 1000 to charge products of certain brands. The data is for reference only. Actual user experience may vary.
Fast Charges DJI Drones
With the aid of separately-sold charging cables, you can fast charge select DJI drone batteries with the DJI Power SDC super-fast charge function, [5] and be up in the air within approximately 30 mins. With three drone batteries and a DJI portable power station, you can enjoy an entire day of worry-free flight and creation.
Mavic 3 Series Intelligent Flight Battery [7] Approx.
32 mins
Battery level from 10% to 95%
DJI Air 3 Intelligent Flight Battery Approx.
30 mins
Battery level from 10% to 95%
Inspire 3 TB51 Intelligent Flight Battery Approx.
28 mins
Battery level from 10% to 95%
Matrice 30 TB30 Intelligent Flight Battery Approx.
32 mins
Battery level from 10% to 95%
* The above charging time data was measured in a controlled test environment and is for reference only.
Multiple Recharging Options
DJI Power 1000 can be recharged in three ways: grid power, solar power, and car power. Whether indoors or on the road, you can flexibly choose the recharging method that works for you.
Grid Power
It's fast and easy to plug in, recharge, and go. When connected to grid power, DJI Power 1000 supports both 540W Fast Recharge Mode and 270W Standard Recharge Mode, with the quickest recharging time being 70 minutes for 100% battery. It can also charge to 80% in just 50 minutes.[1]
Car Power
Easily supercharge any road trip. With the DJI Power Car Power Outlet to SDC Power Cable (12V/24V), you can recharge DJI Power 1000 via car charger for a fully recharged unit in as little as six hours. [1]
Solar Power
DJI Power 1000 can be connected to solar panels through the DJI Power Solar Panel Adapter Module (MPPT) or DJI Power Car Power Outlet to SDC Power Cable, [8] and recharged with environmentally friendly solar power. MPPT (Maximum Power Point Tracking) is an intelligent algorithm that supports real-time monitoring of the voltage generated by connected solar panels. By tracking and maintaining the highest voltage and current values (V-I), the algorithm allows the solar panels to recharge DJI Power 1000 in an optimized and efficient way.
Comprehensive Safety, Ultra-Quiet Operation
Safe and Secure, Inside and Out
Safety comes first at all times. From the body structure and cell chemistry to the system software, DJI Power 1000 features a comprehensive safety design. It has passed 26 product test certifications from the Swiss third-party testing authority SGS, ensuring worry-free electrical usage.
SGS Switzerland Authority Certification
Thanks to its comprehensive safety design, DJI Power 1000 has gained the high-quality portable power station certification from SGS Switzerland, and received 26 product test certifications, including 2 product test verifications, 4 mechanical performance tests, 9 electrical performance tests, 3 environmental resistance tests, 5 noise-level tests, and 3 intelligent and efficient DC power-supplying and recharging tests.
Intelligent Battery Management System (BMS)
When the safety threshold of electricity usage is surpassed, the protective mechanism for supplying power and recharging will kick into action automatically. And once electricity supply returns to normal, DJI Power 1000 will resume operation.
LFP Cell
The LFP cell is safe and durable, and can achieve 4000 cycles, [10] providing a lifespan of approximately 10 years, even with frequent use. [11]
Safe and Reliable Power Usage
High-Strength Structure
The power station uses flame-retardant material and supports weight up to 100 kg, [12] further enhancing reliable protection.
11 Temperature Sensors
11 temperature sensors on the device continually monitor heat dissipation, and the power station can function normally even in temperatures as high as 40°C. [12]
Power Outage Protection
Ten fuses located throughout the power station provide circuit protection for each module. Even if there is a circuit abnormality, DJI Power 1000 will respond quickly and safely.
UPS Mode, Seamless Power Continuity
If an electrical device is connected to a powered-on DJI Power 1000 (via AC output port) and both are receiving grid power, DJI Power 1000 defaults to UPS (Uninterruptible Power Supply) mode. In cases of sudden power outage, DJI Power 1000 can start powering the connected device (or devices) within 0.02 seconds, [12] ensuring continued operation.
Ultra-Quiet Operation
The noise level of DJI Power 1000 is as low as 23 dB [13] during recharging, lower than most household refrigerators, so there is no noise disturbance even in quiet environments.
Outlets for Multiple Scenarios
Extensive Ports, Expanded Applications
Dual USB-C Two-Way Ports (140W Max)
DJI Power 1000 has two 140W USB-C output ports, [4] with a total power output of up to 280 W, a 40% increase compared to the commonly found dual 100W USB-C output ports on the market. It easily meets the electricity demands of most USB-C port devices, while supporting up to PD 3.1 140W charging that can fast charge a 16-inch MacBook Pro.
Extensive Accessories
DJI Power 1000 has dual USB-A ports, dual AC output ports, one SDC port, one SDC Lite port, and two 1/4″ thread holes. It is highly versatile to make power usage in various scenarios more convenient. It can connect to different types of solar panels, power cables, and adapter cables, meeting the needs of a variety of power supply and recharging options.
** Certain accessories are currently out of stock. Stay tuned to DJI updates on availability.
*** Actual appearance of certain accessories may vary.
**** The appearance of products sold in different countries and regions may vary. Refer to the actual item.
- Notes:
- When the product's battery level is above 20%, it can achieve a maximum continuous output power of 2200 W. At an output power of 2400 W, the product can sustain approx. 90 seconds of runtime.
- Device power does not exceed 2000 W.
- Data tested under laboratory conditions at 25° C (77° F) and should be used for reference only.
- Each USB-C port supports a max output power of 140 W. The device being charged must support the PD 3.1 protocol and use a USB cable that meets EPR specifications.
- Requires certain accessories, which are sold separately.
- DJI Power 1000 units purchased from the DJI Store will have a three-year warranty, which can be extended by an additional two years after registration. Consult customer service on DJI Store for more details.
- Supports DJI Mavic 3 Pro Series, Mavic 3 Classic, Mavic 3 Series, and Mavic 3 Enterprise Series.
- DJI Power 1000 can connect to up to two DJI Power Solar Panel Adapter Modules (MPPT), which can then connect up to three solar panels, meaning up to six solar panels can be connected to DJI Power 1000 at the same time. Additionally, DJI Power 1000 can connect to one solar panel through the DJI Power Car Power Outlet to SDC Power Cable.
- Requires the DJI Power Solar Panel Adapter Module (MPPT) and solar panels. The aforementioned accessories are sold separately. The minimum time to fully recharge was measured under 25° C (77° F) laboratory conditions and is for reference only. Actual recharging time is subject to factors like the angle of sunlight and light intensity. Actual user experience may vary. To use solar panels not officially recommended by DJI, convert the solar panel connector to an XT60 interface. To prevent damage to the MPPT module and the power station, ensure the open-circuit voltage of the solar panel is less than 30 V. The power output of each solar panel connected to a single XT60 interface should not exceed 200 W, with the total output power of solar panels connected to the entire MPPT module capped at 400 W.
- Measured under 25° C (77° F) laboratory conditions, being recharged in the 600W Standard Recharge Mode, and at an output power of 1000 W.
- Based on the correct usage of the product, DJI Power 1000 will have an approximate lifespan of 10 years, calculated on the basis of completing one full recharge/discharge cycle on a daily basis. This data is for reference only. Actual user experience may vary.
- Data measured in a DJI laboratory.
- Measured 100 cm away from DJI Power 1000 while it was being recharged in the Standard Recharging Mode and is for reference only.
- During power output, the device being charged must support the PD 3.0 protocol. During power input (recharging the power station), the charger must support the PD 3.0 protocol.
| General | |
|---|---|
| Model | DYM1000L/DYM1000H |
| Capacity | 1024 Wh |
| Net Weight | Approx. 13 kg |
| Dimensions | 448×225×230 mm (L×W×H) |
| Number of Ports |
|
| Max Operating Altitude | 3000 m |
| Output Specifications | |
| AC Output |
Given that the voltage in Japan is 100 V, the max continuous output power of the Japanese version is 2000 W. |
| AC Output (Bypass Mode) |
|
| USB-A Output |
|
| USB–C Output |
|
| SDC and SDC Lite Output |
|
| Input Specifications | |
| AC Input |
|
| SDC and SDC Lite Input |
|
| Battery | |
| Cell Chemistry | LFP (lithium ferrophosphate) |
| Cycle Life | Maintains over 70% capacity after 4000 cycles. Measured at 25°C room temperature, being recharged in the 600W Standard Recharge Mode, and at an output power of 1000 W. |
| Operating Temperature | |
| Power Supply Temperature | -10° to 45°C |
| Recharging Temperature | 0° to 45°C |
| Storage Temperature | -10° to 45°C |
DJI Power Expansion Battery 2000
Portable Power Stations
2048Wh High Capacity, Expand Power 1000 Up to 11264 Wh
The DJI Expansion Battery 2000 has a capacity of 2048 Wh, yet its size is comparable to the 1024Wh DJI Power 1000. The unit is lightweight and compact, making it easy to stack and carry. It can be connected to a Power 1000 unit via designated cable[5] and up to five expansion batteries can be connected, offering five flexible expansion options: 3072 Wh, 5120 Wh, 7168 Wh, 9216 Wh, and 11264 Wh.[1]
High-Power Recharging and Power Supply, Maximum Drive
2400-2600W Powerful Output, Genuine Drive
When used with a Power 1000, the expansion battery can provide a continuous power supply of 2400 W[2] and a max output of 2600 W for 15 minutes.[6] The ultra-high output power can effortlessly power 99% of daily appliances.[3]
1950W High-power Recharging, Super-Fast Full Charge
When paired with a Power 1000, the expansion battery's recharging power can reach 1950 W, reaching 1024 Wh in approximately 36 minutes[4] for fast power when you need it urgently.
Ports On One Side, Easy to Stack and Store
The ports, buttons, and screen are all integrated on the front of the unit. Both sides and the back of the unit have 1/4" threaded holes, making it more convenient to operate and secure the device. The single-side wiring design allows for easy stacking, saving space and keeping things neat during storage.
Quality Assurance, Safe and Durable
The LFP (lithium ferrophosphate) cell allows 4000 cycles.[7] Additionally, DJI's intelligent Battery Management System (BMS) adopts a new sub-nano protective coating technology, allowing the expansion battery to operate safely in conditions such as rain, condensation, and salt fog.[8] It also continuously monitors the status of the expansion battery. Even when multiple expansion batteries are connected, the batteries and the Power 1000 maintain normal heat dissipation, helping to extend battery life.
Versatile Energy Storage for All Scenarios
When used with a Power 1000, the expansion battery can integrate into your car's electrical system via the Super Fast Chargers.[5] Whether on the road or at home, you can flexibly choose your energy storage solution.
DJI Power 1.8kW Solar/Car Super Fast Charger[5]
The expansion battery, DJI Power 1000, and the DJI Power 1.8kW Solar/Car Super Fast Charger can form an energy storage and power supply system suitable for RVs. The Super Fast Charger enables quick recharging of the Power 1000 and the expansion battery,[9] reverse charging to the RV's battery, and capacity expansion of the car's electrical system, ensuring added power security during your ride.
Solar Generator for Home Backup Battery
The expansion battery, Power 1000, and the DJI Power 1.8kW Solar/Car Super Fast Charger can form a home energy storage and power supply system. The 1.8 kW Super Fast Charger can connect to solar panels via the XT90 port,[5] to enable a max 1800W[11] solar power output to quickly recharge the Power 1000 and the expansion battery, enabling a more eco-friendly and economical home energy storage and usage solution.
DJI Power 1kW Super Fast Car Charger[5]
The expansion battery, Power 1000, and the DJI Power 1kW Super Fast Car Charger can form an energy storage and power supply system suitable for cars. The Super Fast Charger enables quick recharging of the Power 1000 and the expansion battery,[10] reverse charging to the car battery, and capacity expansion of the car's electrical system, ensuring added power security during your ride.
- DJI Power 1000 can connect up to 5 expansion batteries, which provide up to 11264 Wh when fully charged.
- At an ambient temperature of 25°C, when used with DJI Power 1000 (DYM1000H, the 220V version), it can stably output at a maximum continuous power of 2400 W until battery runs out. Data was tested in a controlled laboratory environment.
- When used with DJI Power 1000 (DYM1000H, the 220V version), it can support devices with power consumption not exceeding 2600 W.
- Measured at an ambient temperature of 25°C with one expansion battery connected to DJI Power 1000 (via SDC to SDC) and being recharged by grid power at 1950 W via the AC port on the power station. This data is for reference only. Actual user experience may vary.
- Sold separately.
- Measured with the battery temperature at approx. 25°C and at approx. 50% battery level. Duration may vary due to differences in battery temperature and battery level. Refer to the actual usage. It is recommended to use the max power output when the battery is at a moderate temperature and a relatively higher battery level. Data was tested in a controlled laboratory environment.
- Measured at an ambient temperature of 25°C when connected to the DJI Power 1000 and being recharged at 500 W and at 1000W output power. It maintains over 80% capacity after 4000 cycles. This data is for reference only. Actual user experience may vary.
- To ensure product performance, it is not recommended to operate the expansion battery in a rainy environment for more than 3 minutes, or expose the expansion battery to condensation or salt fog for extended periods.
- At ambient temperatures between 0° to 45°C, the 1.8 kW Super Fast Charger can continuously recharge DJI Power 1000 at 600 W via the car's alternator. It can also simultaneously connect to up to 1200W solar panel(s) to recharge the Power 1000 with solar power. When using with DJI Power 1000, achieving the 1800W max recharging power requires connecting the power station to a DJI Power Expansion Battery 2000. Data was tested in a controlled laboratory environment.
- At ambient temperatures between 0° to 45°C, the 1kW Super Fast Car Charger can recharge DJI Power 1000 at a maximum power of 1000 W via the car's alternator. Data was tested in a controlled laboratory environment.
- DJI Power 1.8kW Solar/Car Super Fast Charger's MC4 Solar Panel Cable supports up to 1200W solar input. In the meantime, its XT90 Car/Solar Charging Port can be expanded to an MC4 connector using the separately sold DJI Power 1.8kW Super Fast Charger XT90 to MC4 Adapter Cable, providing an additional 600W solar input. When using with DJI Power 1000, achieving the 1800W max recharging power requires connecting the power station to a DJI Power Expansion Battery 2000.
| DJI Power Expansion Battery 2000 | |
|---|---|
| Weight | Approx. 16.5 kg |
| Dimensions | 448.5×225×234 mm (L×W×H) |
| Capacity | 40 Ah |
| Ports | SDC Port × 2 |
| Input | Input Voltage: 58.4 V Max Input Current: 60 A |
| Output | Output Voltage: 40.0-58.4 V Max Output Current: 60 A |
| Battery Type | LFP (lithium ferrophosphate) |
| Battery Cycles | Maintains over 80% capacity after 4000 cycles. Measured at an ambient temperature of 25°C when connected to the DJI Power 1000 and being recharged at 500 W and at 1000W output power. |
| Power Supply Temperature | -10° to 45°C |
| Recharging Temperature | 0° to 45°C |
| Storage Temperature | -20° to 50°C |