DJI Matrice 350 RTK

In Stock



  • 55-Min Max Flight Time[1]
  • IP55 Rating[2]
  • DJI O3 Enterprise Transmission
  • DJI RC Plus
  • 400 Battery Cycles[3]
  • 6-Directional Sensing & Positioning
  • Night-Vision FPV Camera
  • Multi-Payload Support

In the box:

  • Aircraft ×1
  • Landing Gear ×2
  • 2210s Propeller (pair) ×1
  • DJI RC Plus Remote Controller ×1
  • WB37 Intelligent Battery ×1
  • Spare Gimbal Damper ×4
  • Screws and Tools
  • Cleaning Tools ×1
  • Rubber Port Cover (set) ×1
  • Carrying Case ×1

Ask for prices and available quantities

More details

9 560,00 € VAT incl. (20%)
7 966,67 € VAT excl.

More info

Fully Powered to Forge Ahead

An upgraded flagship drone platform, the Matrice 350 RTK sets a new benchmark for the industry. This next-generation drone platform features an all-new video transmission system and control experience, a more efficient battery system, and more comprehensive safety features, as well as robust payload and expansion capabilities. It is fully powered to inject innovative strength into any aerial operation.

Effortlessly Powerful Flight Performance

Built tough, the Matrice 350 RTK features powerful propulsion, enhanced protection rating, and excellent flight performance, allowing it to effortlessly tackle a wide variety of challenges.

Max Flight Time

55 mins [1]

Protection Rating

IP55 [2]

Max Payload

2.7 kg

Max Flight Altitude

7000 m [4]

Max Wind Speed Resistance

12 m/s

Operating Temperature

-20° to 50°C

Stay Stable With New Transmission System

O3 Enterprise Transmission

Matrice 350 RTK adopts DJI O3 Enterprise Transmission, which supports triple-channel 1080p HD live feeds, [5] and a max transmission distance of 20 km. [6] Both the aircraft and the remote controller have a four-antenna transceiver system, which can intelligently select the two optimal antennas to transmit signals, while the four antennas receive signals simultaneously. In this way, anti-interference capabilities are significantly improved, and transmission stability is optimized.

New Control Experience


DJI Matrice 350 RTK

Equipped with a 7-inch high-bright screen, DJI RC Plus supports Dual Operator Mode and comes with a standard WB37 external battery that offers an operating time of up to six hours, meeting various operation needs.

Built Ready for Harsh Environments

IP54 rated, [2] DJI RC Plus is dustproof and waterproof to operate reliably in bad weather. The operating temperature is -20° to 50° C (-4° to 122° F), supporting around-the-clock operation even in severely hot or cold environments.

Smooth and Efficient Control

There are several buttons and dials on the front, back, and top of the remote controller for fast operation. Button functions can be customized to fit users’ habits and deliver an intuitive and flexible experience.

DJI Pilot 2

DJI Matrice 350 RTK

The DJI Pilot 2 app has been further optimized to clearly present the mission type and flight status. Easy and smooth control of the aircraft and payloads facilitates more efficient operation.

Upgraded Battery System

DJI Matrice 350 RTK

New Dual-Battery System

DJI Matrice 350 RTK

The Matrice 350 RTK is equipped with a new TB65 dual-battery system, which supports battery hot swapping and allows for multiple flights without powering off. The battery can be charged up to 400 cycles, [3] reducing the cost of a single flight.

Next-Gen Intelligent Battery Station

The new BS65 Intelligent Battery Station provides a one-stop solution for battery charging, storage, and transport.

Multiple Charging Modes

DJI Matrice 350 RTK

In Storage Mode, charge the battery to 50%, which is good for long-term storage. In Ready-to-Fly Mode, quickly charge multiple battery sets to 90% to start operation at any time and extend the battery life.

Intelligent Management

DJI Matrice 350 RTK

When the battery station is connected to DJI RC Plus, the DJI Pilot 2 app will display the battery status and health information. In addition, you can set the number of self-discharge days, update the firmware, export logs, and access other quick operations with one tap.

Effortless Transitions

DJI Matrice 350 RTK

The battery station is designed with 360°-movement wheels for more convenient transportation and transitions.

Enhanced Flight Safety

Arm Lock Indicator

The Matrice 350 RTK adds a new arm lock detection function to avoid the risk of unlocked arm sleeves, allowing you to focus on flight with more peace of mind.

Night-Vision FPV Camera

Thanks to its excellent night vision capabilities, the FPV camera can clearly present the surroundings and obstacles during flight at night. It works in tandem with the PinPoint function to provide better navigation for safe flight, assisting in more confident operation at night.

6-Directional Sensing & Positioning

The Matrice 350 RTK is designed with a six-directional binocular vision system and an infrared sensing system for six-directional awareness, positioning, and obstacle-sensing capabilities, providing comprehensive protection during flight. [7]

CSM Radar [8]

With the CSM Radar installed, Matrice 350 RTK can detect subtle obstacles upward or within the horizontal 360° range and avoid them in time. [9] The effective detection range is up to 30 m, [10] further improving flight safety.

Multi-Layered Redundancy Design

Both the aircraft system and the sensor system of the Matrice 350 RTK adopt a redundancy design to maximumly ensure flight safety, allowing you to cope with harsh operating environments more confidently.

Powerful Payloads [8]

The Matrice 350 RTK supports a single downward gimbal, dual downward gimbals, [11] and single upward gimbal, [11] and has an E-Port open interface. With a max payload capacity of 2.7 kg, the aircraft can carry up to three payloads simultaneously, meeting the needs of different operation scenarios like public safety, inspection, and mapping.

Zenmuse H20 Series

The four-sensor system of zoom camera, wide camera, thermal camera, and laser rangefinder works together, supplemented by advanced intelligent algorithms, to deliver outstanding sensing and imaging performance.

DJI Matrice 350 RTK

Zenmuse H20N

Zenmuse H20N integrates starlight sensors into its zoom and wide-angle cameras. Pair this with dual zoom thermal cameras and a laser rangefinder, and you have a versatile hybrid payload that rises to the occasion.

DJI Matrice 350 RTK

Zenmuse P1

Zenmuse P1 integrates a full-frame sensor with interchangeable fixed-focus lenses on a 3-axis stabilized gimbal. Designed for photogrammetry flight missions, it takes efficiency and accuracy to a whole new level.

DJI Matrice 350 RTK

Zenmuse L1

Zenmuse L1 integrates a Livox Lidar module, a high-accuracy IMU, and a mapping camera. When used with the flight platform, it forms a complete solution that gives you real-time 3D data throughout the day, efficiently capturing the details of complex structures and delivering highly accurate reconstructed models.

DJI Matrice 350 RTK

Third-Party Payloads

Customized payloads like gas detectors, loudspeakers, and multispectral sensors can be combined with Matrice 350 RTK through DJI Payload SDK to expand application fields.

Intelligent Operation

High-Precision Mapping

Matrice 350 RTK supports Waypoint, Mapping, Oblique, and Linear Flight missions. You can use Terrain Follow [12] or Smart Oblique [13] for efficient data collection. Together with DJI Terra, you can quickly obtain HD 2D and 3D digital results, enabling high-precision and high-efficiency mapping operation.

Air-to-Ground Coordination

With functions like the high-precision PinPoint and cloud-based real-time mapping, [14] the Matrice 350 RTK can link the air, ground, and cloud together. After the aircraft completes image collection, DJI FlightHub 2 can quickly model the operation site and transmit command information to the aircraft and ground operators. Both the remote controller and FlightHub 2 support point, line, surface drawing, and real-time uploading, and can cooperate with the aircraft to livestream the real-time operation view, breaking through communication barriers for air-to-ground collaborative operation.

Automated Precision Inspection

Through Live Mission Recording, the Matrice 350 RTK can generate and store flight route files that can be used at any time to realize automated operation and make repetitive inspection no longer time-consuming or effort-consuming. When using AI Spot-Check, [15] the Matrice 350 RTK supports automatic framing and manual adjustment of subjects to improve the accuracy of repeated shooting and the quality of inspection operation.

User Data Security

DJI Matrice 350 RTK

Media Data Encryption

DJI Matrice 350 RTK

Local Data Mode

DJI Matrice 350 RTK

AES-256 Video Transmission Encryption

DJI Matrice 350 RTK

Cloud API

DJI Matrice 350 RTK

* Please check and strictly abide by local laws and regulations before flying.
** All data was tested with a production model Matrice 350 RTK in a controlled environment. Actual experience may vary depending on the environment, usage, and firmware version.
*** All videos and images on this page were shot in strict compliance with relevant local laws and regulations.
**** Before use, Matrice 350 RTK must be activated via the DJI Pilot 2 app.
  1. Measured with Matrice 350 RTK flying at approximately 8 m/s without payloads in a windless environment until the battery level reached 0%. Data is for reference only. Please pay attention to reminders in the app for the actual usage time.
  2. Measured in a controlled environment. The IP rating is not permanently effective and may decrease due to product wear and tear.
  3. Up to 400 cycles if the accumulative duration of battery level ≥ 90% is less than 120 days within 12 months.
  4. Measured with the 2112 High-Altitude Low-Noise Propellers and the takeoff weight ≤ 7.2 kg.
  5. Dual Operator Mode required.
  6. Measured with FCC compliance in an unobstructed environment with low interference at a flight altitude of approximately 120 m. Data is for reference only. During your flight, please pay attention to reminders in the app.
  7. There are certain blind areas of visual sensing and infrared sensing. Positioning and obstacle-sensing performance may be affected by the flight environment and obstacle characteristics. Please fly with caution.
  8. Sold separately.
  9. Please enable the radar obstacle avoidance function in the DJI Pilot 2 app and set the aircraft safety distance (> 2.5 m is recommended), and the flight speed should be < 10 m/s.
  10. Measured when the radar reflection cross-sectional area of the detection target is ≥ 0.4 m². The effective detection range may vary with the size and material of the obstacle.
  11. Gimbal connector is sold separately.
  12. This function requires the remote controller to connect to the Internet and download DEM files.
  13. This function requires Zenmuse P1.
  14. DJI FlightHub 2 required.
  15. This function requires the Zenmuse H20 Series payloads.
  16. The accessories in this section can also be used with the Matrice 300 RTK.
  17. Measured with CE compliance.
  18. The aircraft comes with E-Port, while SkyPort and X-Port components are sold separately.
Dimensions (unfolded, without propellers)810×670×430 mm (L×W×H)
Dimensions (folded, with propellers)430×420×430 mm (L×W×H)
Diagonal Wheelbase895 mm
Weight (with single downward gimbal)
  • Without batteries: Approx. 3.77 kg
  • With two TB65 batteries: Approx. 6.47 kg
Single Gimbal Damper’s Max Payload960 g
Max Takeoff Weight6.47 kg
Operating Frequency
  • 2.4000-2.4835 GHz
  • 5.150-5.250 GHz (CE: 5.170-5.250 GHz)
  • 5.725-5.850 GHz
In some countries and regions, the 5.1GHz and 5.8GHz frequency bands are prohibited, or the 5.1GHz frequency band is only allowed for indoor use. Please refer to local laws and regulations for more information.
Transmitter Power (EIRP)
  • 2.4000-2.4835 GHz:
    • < 33 dBm (FCC)
    • < 20 dBm (CE/SRRC/MIC)
  • 5.150-5.250 GHz (CE: 5.170-5.250 GHz):
    • < 23 dBm (CE)
  • 5.725-5.850 GHz:
    • < 33 dBm (FCC/SRRC)
    • < 14 dBm (CE)
Hovering Accuracy (with moderate or no wind)
  • Vertical:
    • ±0.1 m (with vision positioning)
    • ±0.5 m (with GNSS positioning)
    • ±0.1 m (with RTK positioning)
  • Horizontal:
    • ±0.3 m (with vision positioning)
    • ±1.5 m (with GNSS positioning)
    • ±0.1 m (with RTK positioning)
RTK Positioning Accuracy (RTK FIX)
  • 1 cm + 1 ppm (horizontal)
  • 1.5 cm + 1 ppm (vertical)
Max Angular Velocity
  • Pitch: 300°/s
  • Yaw: 100°/s
Max Pitch Angle30°
When in N mode and with the forward vision system enabled: 25°.
Max Ascent Speed6 m/s
Max Descent Speed (vertical)5 m/s
Max Tilted Descent Speed7 m/s
Max Horizontal Speed23 m/s
Max Flight Altitude
  • 5000 m
    When using the 2110s propellers and with the takeoff weight ≤ 7.4 kg.
  • 7000 m
    When using the 2112 High-Altitude Low-Noise Propellers and with the takeoff weight ≤ 7.2 kg.
Max Wind Speed Resistance12 m/s
Max Flight Time55 minutes
Measured with Matrice 350 RTK flying at approximately 8 m/s without payloads in a windless environment until the battery level reached 0%. Data is for reference only. Actual usage time may vary depending on the flight mode, accessories, and environment. Please pay attention to reminders in the app.
Supported DJI Gimbals
  • Zenmuse H20
  • Zenmuse H20T
  • Zenmuse H20N
  • Zenmuse P1
  • Zenmuse L1
Supported Gimbal Configurations
  • Single downward gimbal
  • Single upward gimbal
  • Dual downward gimbals
  • Single downward gimbal + single upward gimbal
  • Dual downward gimbals + single upward gimbal
Ingress Protection RatingIP55
The IP rating is not permanently effective and may decrease due to product wear and tear.
Global Navigation Satellite SystemGPS + GLONASS + BeiDou + Galileo
Operating Temperature-20° to 50°C
Remote Controller
Screen7.02-inch LCD touchscreen; resolution: 1920×1200; max brightness: 1200 nits
  • Approx. 1.25 kg (without WB37 battery)
  • Approx. 1.42 kg (with WB37 battery)
Global Navigation Satellite SystemGPS + Galileo + BeiDou
Built-in Battery
  • Type: Li-ion (6500 mAh@7.2 V)
  • Charging Type: Use the battery station or USB-C fast charger with a max power of 65 W (max voltage of 20 V).
  • Charging Time: 2 hours
  • Chemical System: LiNiCoAlO2
External Battery (WB37 Intelligent Battery)
  • Capacity: 4920 mAh
  • Voltage: 7.6 V
  • Type: Li-ion
  • Energy: 37.39 Wh
  • Chemical System: LiCoO2
Ingress Protection RatingIP54
Operating Time
  • Built-in Battery: approx. 3.3 hours
  • Built-in Battery + External Battery: approx. 6 hours
Operating Temperature20° to 50°C
Operating Frequency
  • 2.4000-2.4835 GHz
  • 5.725-5.850 GHz
Transmitter Power (EIRP)
  • 2.4000-2.4835 GHz:
    • < 33 dBm (FCC)
    • < 20 dBm (CE/SRRC/MIC)
  • 5.725-5.850 GHz:
    • < 33 dBm (FCC)
    • < 14 dBm (CE)
    • < 23 dBm (SRRC)
Wi-Fi ProtocolWi-Fi 6
Wi-Fi Operating Frequency
  • 2.4000-2.4835 GHz
  • 5.150-5.250 GHz
  • 5.725-5.850 GHz
Bluetooth ProtocolBluetooth 5.1
Bluetooth Operating Frequency2.4000-2.4835 GHz
Video Transmission
Video Transmission SystemDJI O3 Enterprise Transmission
Antenna4 video transmission antennas, 2T4R
Max Transmission Distance (unobstructed, free of interference)
  • 20 km (FCC)
  • 8 km (CE/SRRC/MIC)
Max Transmission Distance (with interference)
  • Low Interference and Obstructed by Buildings: approx. 0-0.5 km
  • Low Interference and Obstructed by Trees: approx. 0.5-3 km
  • Strong Interference and Unobstructed: urban landscape, approx. 1.5-3 km
  • Medium Interference and Unobstructed: suburban landscape, approx. 3-9 km
  • Low Interference and Unobstructed: suburb/seaside, approx. 9-20 km
Measured with FCC compliance in unobstructed environments with typical interference at a flight altitude of approximately 120 m. Data is for reference only. The actual transmission distance may vary depending on the environment’s obstruction and interference conditions. Please pay attention to reminders in the app.
Vision System
Obstacle Sensing Range
  • Forward/Backward/Left/Right: 0.7-40 m
  • Upward/Downward: 0.6-30 m
  • Forward/Backward/Downward: 65° (horizontal), 50° (vertical)
  • Left/Right/Upward: 75° (horizontal), 60° (vertical)
Operating EnvironmentSurfaces with discernible patterns and adequate lighting (lux > 15)
Infrared Sensing System
Obstacle Sensing Range0.1-8 m
FOV30° (±15°)
Operating EnvironmentLarge, diffuse, and reflective obstacles (reflectivity > 10%)
LED Auxiliary Light
Effective Illumination Distance5 m
Illumination Type60 Hz, solid glow
FPV Camera
Frame rate30fps
Intelligent Flight Battery
Capacity5880 mAh
Voltage44.76 V
Battery TypeLi-ion
Energy263.2 Wh
WeightApprox. 1.35 kg
Operating Temperature-20° to 50°C
Ideal storage temperature22° to 30°C
Charging Temperature-20° to 40°C
When the ambient temperature is below 5°C, the battery will trigger the auto-heating function. Charging at low temperatures may reduce battery life. It is recommended to charge at 15° to 35°C.
Charging time
  • With a 220V power supply, it takes approximately 60 minutes to fully charge two TB65 Intelligent Flight Batteries and approximately 30 minutes to charge them from 20% to 90%.
  • With a 110V power supply, it takes approximately 70 minutes to fully charge two TB65 Intelligent Flight Batteries and approximately 40 minutes to charge them from 20% to 90%.
Intelligent Battery Station
Dimensions580×358×254 mm (L×W×H)
Net WeightApprox. 8.98 kg
Compatible Stored Items
  • Eight TB65 Intelligent Flight Batteries
  • Four WB37 Intelligent Batteries
Input Voltage
  • 100-120 VAC, 50-60 Hz
  • 220-240 VAC, 50-60 Hz
Max Input Power1070 W
Output Power
  • 100-120 V: 750 W
  • 220-240 V: 992 W
Operating Temperature-20° to 40°C